low noise catv amplifier 50 - 1005 mhz rev. v1 maam - 007724 1 1 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 1 features ? low distortion ? low noise figure ? push pull design ? single positive supply ? lead - free 4 mm 20 - lead pqfn package ? 100% matte tin plating over copper ? halogen - free green mold compound ? rohs* compliant and 260c reflow compatible description m/a - coms maam - 007724 is a gaas phemt mmic amplifier in a lead - free 4 mm 20 - lead pqfn package. the mmic design is configured as a pair of cascode phemt amplifiers for broadband performance. it is designed for integration in a 75 - ohm push - pull, low distortion, amplifier circuit. the device is ideally suited for use in catv, dbs, and hdtv applications where low noise figure and low distortion are required. parameter absolute maximum input power +20 dbm operating voltage +10 volts operating temperature - 40c to +85c storage temperature - 65c to +150c absolute maximum ratings 2,3 functional schematic pin no. pin name description 1 n/c no connection 2 n/c no connection 3 fb1 feedback 1 4 n/c no connection 5 n/c no connection 6 ri1 rf input 1 7 n/c no connection 8 n/c no connection 9 n/c no connection 10 ri2 rf input 2 11 n/c no connection 12 n/c no connection 13 fb2 feedback 2 14 n/c no connection 15 n/c no connection 16 ro2 rf output 2 17 n/c no connection 18 n/c no connection 19 n/c no connection 20 ro1 rf output 1 pin configuration 4 ordering information 1 part number package maam - 007724 - tr1000 1000 piece reel maam - 007724 - tr3000 3000 piece reel maam - 007724 - 000smb sample test board (includes 5 samples) 1. reference application note m513 for reel size information. 4. the exposed pad centered on the package bottom must be connected to rf and dc ground. 2. exceeding any one or combination of these limits may cause permanent damage to this device. 3. m/a - com does not recommend sustained operation near these survivability limits. * restrictions on hazardous substances, european union directive 2002/95/ec. n/c n/c n/c fb1 n/c n/c n/c fb2 n/c n/c ri1 n/c n/c n/c ri2 ro1 n/c n/c n/c ro2 text text text text text text text text text text n/c n/c n/c fb1 n/c n/c n/c fb2 n/c n/c ri1 n/c n/c n/c ri2 ro1 n/c n/c n/c ro2 text text text text text text text text text text
low noise catv amplifier 50 - 1005 mhz rev. v1 maam - 007724 2 2 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 2 parameter test conditions units min. typ. max. gain db 11.5 12.2 13.0 gain flatness db 0.4 1.0 noise figure db 3.3 4.0 input vswr ratio 1.3:1 output vswr ratio 1.5:1 output ip3 two tones at 397 & 403 mhz, +4 dbm output per tone dbm 32 composite triple beat, ctb 135 channels, +13 dbmv/channel at the input dbc - 78 - 70 composite second order, cso 135 channels, +13 dbmv/channel at the input dbc - 78 - 70 cross modulation 135 channels, +13 dbmv/channel at the input dbc - 73 - 64 p1db 400 mhz dbm 24 i dd +5 volts ma 190 225 electrical specifications: t a = 25c, freq: 50 - 1005 mhz, v dd = +5 volts, z 0 = 75 ohms test circuit with m/a - com balun etn1 - 1 - 13 qty description 8 capacitor, 0.01 f, 0603, smt, 10% (c1 - c8) 2 capacitor, 2 pf, 0402, smt, 0.25pf (c9 - c10) 2 inductor, 390 nh, 1008, smt, 10% (l1, l2) 2 balun, 1:1, m/a - com, etn1 - 1 - 13, smt (t1,t2) 2 resistor, 0 ohms, 0603, smt (r1, r2) external circuitry parts list test circuit schematic 5 5. the 1:1 baluns, t1 & t2, are m/a - com part number etn1 - 1 - 13. 6. reference m/a - com application note s2083 for recommended pcb configuration. r1 and r2 are 0 ohms. recommended test circuit layout 6 handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these devices. rf in t1 t2 c2 c7 c8 l2 c6 l1 c5 +5v +5v c3 c4 c1 rf out r2 r1 text text text text text text text text text text c9 c10 rf in t1 t2 c2 c7 c8 l2 c6 l1 c5 +5v +5v c3 c4 c1 rf out r2 r1 text text text text text text text text text text c9 c10
low noise catv amplifier 50 - 1005 mhz rev. v1 maam - 007724 3 3 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 3 noise figure vs. frequency, 25 c gain vs. frequency to 3 ghz gain oip output return loss typical performance curves input return loss -10 -5 0 5 10 15 20 0 500 1000 1500 2000 2500 3000 +25c +85c -40c frequency (mhz) -30 -25 -20 -15 -10 -5 0 0 200 400 600 800 1000 +25c +85c -40c frequency (mhz) -30 -25 -20 -15 -10 -5 0 0 200 400 600 800 1000 +25c +85c -40c frequency (mhz) 30 31 32 33 34 35 36 -10 -8 -6 -4 -2 0 2 4 pin (dbm) 0 1 2 3 4 5 0 200 400 600 800 1000 frequency (mhz) 10.5 11.0 11.5 12.0 12.5 13.0 13.5 0 200 400 600 800 1000 +25c +85c -40c frequency (mhz)
low noise catv amplifier 50 - 1005 mhz rev. v1 maam - 007724 4 4 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 4 lead - free 4 mm 20 - lead pqfn ? gain vs. p out at 400 mhz typical performance curves (continued) ? reference application note m538 for lead - free solder reflow recommendations. meets jedec moisture sensitivity level 1 requirements. 10 11 12 13 14 15 16 18 20 22 24 26 +25c +85c -40c pout (dbm)
low noise catv amplifier 50 - 1005 mhz rev. v1 maam - 007724 5 5 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 5 m/a - com technology solutions inc. all rights reserved. information in this document is provided in connection with m/a - com technology solutions inc ("macom") products. these materials are provided by macom as a service to its customers and may be used for informational purposes only. except as provided in macom's terms and conditions of sale for such products or in any separate agreement related to this document, macom assumes no liability whatsoever. macom assumes no responsibility for errors or omissions in these materials. macom may make changes to specifications and product descriptions at any time, without notice. macom makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. no license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. these materials are provided "as is" without warranty of any kind, either express or implied, relating to sale and/or use of macom products including liability or warranties relating to fitness for a particular purpose, consequential or incidental damages, merchantability, or infringement of any patent, copyright or other intellectual property right. macom further does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. macom shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. macom products are not intended for use in medical, lifesaving or life sustaining applications. macom customers using or selling macom products for use in such applications do so at their own risk and agree to fully indemnify macom for any damages resulting from such improper use or sale.
|
